Projects in Purification Plants
Special features of the slip ring assembly
The areas of application of this slip ring assembly model are circular scrapers in purification plants. Power and data transfer from the stationary switchgears and control systems to the drives on the rotating circular scraper bridge is carried out by the slip ring assembly.
The slip ring assembly has an inner protection tube with a diameter of 110 mm. This enables the central lead-through of hoses or tubes for sludge recirculation.
The slip rings are pre-wired up to the terminals in the slip ring assembly housing, which enables easy installation. The slip ring assembly has a high grade corrosion protection and a thermostatically regulated heater, to prevent the formation of condensation.
The outer coating is divided into 2 x 180° segments and can be completely removed. This ensures ideal access to the slip ring assembly for installation and maintenance work.
Technical data - Type “MKSRR 200”
Material
| Housing: |
steel |
| Insulation: |
glass reinforced laminate |
| Corrosion protection: |
double painting
(galvanizing is possible) |
General data
| Bearing: |
relubricatable spherical rotary joint |
| Attachment: |
flange attachment |
| Protection class (housing): |
IP 65 |
Main current
| Number of poles: |
PE+26 |
| Slip rings: |
brass rings |
| Slip ring diameter: |
200 mm |
| Current collector: |
2 bronze carbons per slip ring |
| Voltage: |
max. 500 V (AC) |
| Amperage: |
max. 50 A |
Data transmission
| System: |
Profibus “DP” |
| Number of poles: |
4 + 1 poles for the screening of the cable |
| Contact plate: |
gold-plated contact plates (multi-layer) |
| Contact piece: |
4 silver-nickel contacts per contact plate |
